Skip to main content

Cleaning and Maintenance

Regular cleaning and maintenance is recommended to keep the device in good working condition.

Daily Cleaning​

  1. Disconnect power before cleaning.
  2. Use a soft, clean, lint-free cloth to wipe the surface of the device.
  3. For dust, fingerprints, or general dirt, use a dry or lightly dampened soft cloth.
  4. When cleaning the touchscreen, wipe gently and avoid sharp or abrasive materials.

Disinfection​

The device enclosure supports the following common disinfection methods:

UV Sterilization​

UV sterilization may be applied to the outer surface of the device in accordance with laboratory management protocols. Follow the operating instructions of the UV equipment and ensure personnel are not directly exposed to UV light without appropriate protection.

Alcohol Wipe-Down​

Use alcohol wipes or a soft cloth lightly dampened with alcohol to wipe the outer surface of the device. When doing so, please note:

  • Do not spray liquid directly onto the device surface
  • Avoid alcohol entering USB-C ports, gaps, or the interior of the device
  • Allow the surface to dry completely before reconnecting power

Maintenance Recommendations​

  1. Keep device slots, ports, and surfaces clean. Avoid accumulation of dust or liquid.
  2. When not in use for extended periods, disconnect power and store in a dry, clean environment.
  3. Do not use strongly corrosive, acidic, alkaline, or abrasive cleaning agents.
  4. Do not attempt to disassemble the device enclosure or internal components.
  5. If the device surface, ports, or connectors show signs of contamination, liquid residue, or damage, stop use and contact after-sales support.